Accessing the Internet with Zonga Mobile Wi-Fi
1. Power ON
Press and hold Power Button until the screen becomes lightened. Wait until Zonga is connected to mobile network and ready for use.
2. Connect to Zonga
Zonga creates a wireless network to share internet access.
You can connect to Zonga via Wi-Fi using any Wi-Fi enabled device.
Check the network name and password from the back of the device.
3. All you can Internet
You are all set to go. You can share Zonga with up to 5 Wi-Fi devices simultaneously.
Recharge
Connect Zonga to your laptop using Zonga USB cable to charge the device. To save battery you can turn off the device after use.
Sending email
Outgoing Mail Server: mail.cubio.net
Notes
Zonga connects to the Internet automatically using cellular data network whenever you turn it on.
After certain period of inactivity Zonga automatically tears down the Internet connection to save battery.
After 30 minutes of inactivity Zonga switches to the Power Saving sleep mode. You can press any key to activate the device again. Now the screen becomes lightened.
For manual connection press and hold CONNECT button until globe icon is displayed on the screen.
Zonga can only be used via Wi-Fi. If the Zonga Wi-Fi is disabled press WiFi/WPS button until Wi-Fi icon is displayed on the screen.
Mac OS X
1. Make sure that the Airport icon is enabled in your Menu bar.
2. Click the AirPort icon in your menu bar. Select the Your Zonga Network (see the bottom of the Zonga, eg. “Zonga10000″).
3. Enter WPA Password (see the bottom of the Zonga, eg. “1234″)
4. When connected the AirPort icon will change from a ‘light grey’ color to a solid black. You are all set to go.
Windows 7
1. Make sure that Wi-Fi is enabled on your Windows 7 PC. A physical switch on the outside casing of the laptop OR a specific keystroke depending on your PC model.
2. Select Your Zonga Network (see the bottom of the Zonga, eg. “Zonga10000″) and click Connect.
3. Enter WPA Password (see the bottom of the Zonga, eg. “1234″)
4. Wait for a while. The wireless connection icon shows the status in the lower right corner of your PC screen. Your are all set to go.
Windows Vista
1. Make sure that the WiFi is enabled in your Windows Vista PC. A physical switch on the outside casing of the laptop OR a specific keystroke depending on your PC model
2. Click on the icon in the lower right corner of your PC screen and click Connect to a network.
3. Select your Zonga Wireless Network (e.g. Zonga1234) in the list (see the bottom of the Zonga for Network Name), and click Connect
4. Connect to a network dialog box is displayed which requires you to type in the Security Key (see the bottom of the Zonga for WPA), and then click Connect.. e) Wait for a while. The wireless connection icon displays in the status area in the lower right corner of your PC screen > your Windows Vista PC is connected to the Zonga.
Windows XP
1. Make sure that the WiFi is enabled in your computer. A physical switch on the outside casing of the laptop OR a specific keystroke depending on your PC model.
2. Click the network icon in lower right corner of your screen to see the available networks list.
3. Select Your Zonga Network (see the bottom of the Zonga, eg. “Zonga10000″). Click Connect in the lower right corner.
4. Enter WPA Password (see the bottom of the Zonga, eg. “1234″) and click Connect.
5. Windows XP will show its progress as it connects to your network. If the Wireless Network Connection window continues to show Acquiring Network Address, you may have mistyped the WPA key – click Cancel and return to step D).
